Terminal block on 2015 Brutus

1129 Views 6 Replies 3 Participants Last post by kmtngoat, Aug 30, 2021

kmtngoat

Discussion Starter · Feb 26, 2021 (Edited)

I'm having trouble with some wiring while replacing the terminal block under passenger seat. The Service manual isn't helpful and the one photo is of poor quality. Could another forum member help with photo or two of the terminal block and attached wires Thanks

Save

1 - 7 of 7 Posts

nwmegaram

· #2 · Mar 3, 2021

kmtngoat said:
I'm having trouble with some wiring while replacing the terminal block under passenger seat. The Service manual isn't helpful and the one photo is of poor quality. Could another forum member help with photo or two of the terminal block and attached wires Thanks

I can help you out tomorrow, I just did a total rewire of my bobcat 3650, added bussman system and all new swtiches, so been messing in that area lately

Save

kmtngoat

Discussion Starter · #3 · Mar 3, 2021

nwmegaram said:
I can help you out tomorrow, I just did a total rewire of my bobcat 3650, added bussman system and all new swtiches, so been messing in that area lately

One stud on the terminal block was corroded enough it broke of while one of my workers was out with the machine. It was the positive stud towards the front of the machine. He added the wires to the rear positive stud to get the machine running and back to the shop. He did this without noting which wires go on the front. The photos in the service manual PDF's I have are poor quality and I can't make out the wires. A couple clear photos would probably do the trick. Thanks

Save

nwmegaram

· #4 · Mar 4, 2021

kmtngoat said:
One stud on the terminal block was corroded enough it broke of while one of my workers was out with the machine. It was the positive stud towards the front of the machine. He added the wires to the rear positive stud to get the machine running and back to the shop. He did this without noting which wires go on the front. The photos in the service manual PDF's I have are poor quality and I can't make out the wires. A couple clear photos would probably do the trick. Thanks

Oh i see the problem, well mine wont be much help for you then, I have moved all my factory wires around to reconfigured. Maybe I can help you if you show me what wire are there and what options you have.