Polaris Brutus Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I was out mowing my log road and the A frame rod bolt broke off on the nut side. Towed back to the garage and removed tire on driver side and this is what I've found. The metric bolt goes all the way through the A frame pipe and bolts on the other end and the rod is treaded all the way an inner pipe that goes inside the A frame pipe.
I've gone on the net and can only find the replacement rod and bushings with bolts on each end. Does anyone know if these were changed from 2013 HD PTO and will these work as a replacement.
 

· Registered
Joined
·
4 Posts
I was out mowing my log road and the A frame rod bolt broke off on the nut side. Towed back to the garage and removed tire on driver side and this is what I've found. The metric bolt goes all the way through the A frame pipe and bolts on the other end and the rod is treaded all the way an inner pipe that goes inside the A frame pipe.
I've gone on the net and can only find the replacement rod and bushings with bolts on each end. Does anyone know if these were changed from 2013 HD PTO and will these work as a replacement.
I had the same thing happen. I bought a piece of 3/8” round rod, cut it to length and threaded both ends and nutted both ends. I did it about two years ago and it’s still holding up
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top