Polaris Brutus Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
57 Posts
I'm assuming your hyd fluid level is good.

Is the steering a little hard or extremely hard?

Do you hear the squeal when you go full stop in either direction?
 

·
Registered
Joined
·
12 Posts
Discussion Starter #3
steering

Hyd level is good.

Extremely hard, no squealing.

Machine is now at the dealer under warranty, initial phone call from polaris is leaning toward the pump issue.
 

·
Registered
Joined
·
12 Posts
Discussion Starter #5
The verdict

The steering stopped working because of a stuck portion in the priority valve. Located beneath the drivers side seat.

Polaris explaination:
Some valves were torqued to an incorrect value during the installation process.

Valve shall be retorqued and if problem continues, replace valve.

My machine will be getting a new valve.
 

·
Registered
Joined
·
324 Posts
Good to hear, quick diagnosis, hopefully they can get you back up and running before the next snowfall.
 
1 - 6 of 6 Posts
Top