Polaris Brutus Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
I was thinking about utilizing the hydraulic ports on the front of the machine to run some additional hydraulic cylinders, I am curious if anybody know how much they would lift?

I currently have a 3Pt Tiller that I use on the back of my rig, with the Kolpin Dirtworks systems (it has an Electric Linear Actuator). I was wondering if I could swap that out to a hydraulic cylinder and use the front ports, or would that not work? Weights about 150 - 200 lbs

An help would be great!!!

Thanks
 

·
Registered
Joined
·
329 Posts
I was thinking about utilizing the hydraulic ports on the front of the machine to run some additional hydraulic cylinders, I am curious if anybody know how much they would lift?
The main front lift cylinder is rated for 500 pounds; I expect you'd break the (150lb rated) hitch tongue before exceeding the capacity of the pump.

There may be a flow restriction on the aux output and possibly a relief valve (usually a dealer-installed item when you order the plow).
 
1 - 2 of 2 Posts
Top