Polaris Brutus Forum banner

1 - 20 of 27 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter #1
FINISHING MOWER



Ideal for a cutting on large, open lawns.

KEY FEATURES

Wide Side Discharge Deflector: Safely and evenly disperses clippings for clean lawn appearance.
Durable Anti-Scalp Wheels: Won't tear up grass, keeping lawns looking smooth..
Blade Rotation Indicators: Clearly show when the mower is engaged.
Optional Markers: Give operator clear visibility of mower width.

SPECS
Cutting Width: 66" (1676 mm)
Overall Width: 77" (1956 mm)
Overall Length: 51.9" (1318 mm)
Weight: 494 lb (224.1 kg)
Cutting Height Range: 2.3"–5.3" (58 mm–135 mm)
Number of Blades: 3
Blade Tip Speed: 18,400 fpm (5608 mpm)
Discharge: Side
Oscillation: ±10°
PTO Speed: 2000 RPM
 

·
Registered
Joined
·
107 Posts
Discussion Starter #2
SNOW BLOWER



For snow removal jobs that demand more than a snow blade.
Ideal for both private and commercial properties.

KEY FEATURES
Two-Stage Blower Design: Eats up the snow while an impeller blows it up and out of the chute.
Hydraulic Chute Rotator: Throws snow exactly where it needs to be placed.
Adjustable and Replaceable Skid Shoes: Control the cutting depth on irregular surfaces. Helpful on gravel driveways.

Bolt-On Reversible Cutting Edge: Provides long life and easy maintenance.
Chain and Sprocket System: Chute rotation with a chain and sprocket system provides maximum uptime protection by eliminating loose, tangled and frozen cables.
Optional Markers: Give operator clear visibility of snow blower width.

SPECS
Cutting Width: 62" (1575 mm)
Overall Width: 64.4" (1636 mm)
Cutting Height (blower on ground):
21" (533 mm)
Weight: 404 lb (183 kg)
Auger Diameter: 12" (305 mm)
Fan Diameter: 14" (356 mm)
Chute Rotation (Hydraulic): 227°
Deflector Adjustment (Manual): 90°
Drive Line Protection: Shear Bolt
Blower Design: Two Stage
Cutting Edge Design: Reversible/Replaceable
Cutting Edge Dimensions:
0.25" x 4.5" (6 mm x 114 mm) Steel
Skid Shoes: 0.375" (10 mm) Steel
(Adjustable/Replaceable)
 

·
Registered
Joined
·
107 Posts
Discussion Starter #3
ANGLE BROOM



Clear slush, leaves, gravel and other debris from walkways,
parking lots or any other paved surface.

KEY FEATURES
Hydraulically Angles 25° Left or Right: Maneuver broom from inside the vehicle.
Broom Head Floats Fore-To-Aft and Oscillates: Broom follows surface terrain.
Crank Stand Adjustable Wheels:
Eliminate bristle distortion during storage
Easily set and maintain the sweep height to reduce excessive bristle down pressure, Lower to dethatch lawns

Chainless Drive: Eliminates need for greasing the chain or making tension adjustments. No chain and sprocket to remove during bristle maintenance.
24" Diameter Bristles: Maximize uptime with large diameter bristles that have long wear life.
High Bristle Speed: Cleans with fast flick action.
Easy Maintenance: Easily replace bristles without removing chains, sprockets or the broom core.
Optional Debris Deflector: Shields and controls the discharge of material being swept.

SPECS
Working Width (Straight): 70" (1778 mm)
Working Width: (Fully Angled): 65.5" (1664 mm)
Overall Width: 73.9" (1877 mm)
Length: 44.8" (1138 mm)
Height: 471 lb (214 kg)
Operating Weight: 471 lb (214 kg)
Angle: ±25°
Pitch Forward: 9°
Pitch Aft: 5°
Oscillation: ±10°
Bristle Diameter: 24" (610 mm)
Bristle Speed w/2000 RPM PTO:
1257 fpm (383 mpm)
Number of Bristle Sections:
32 Convoluted, 4 Conical
 

·
Registered
Joined
·
107 Posts
Discussion Starter #4
MATERIALS BUCKET



Haul up to 500 lb of loose material, including mulch,
seed, hay, soil or whatever your job demands.

KEY FEATURES
Versatile Bucket: Can be used for loading loose material as well as scraping and other generalpurpose tasks.
Angle Indicator on Bucket: Allows operator to gauge angle of the cutting height.
Optional Markers (as shown): Give operator clear visibility of bucket width.

SPECS
Overall Width: 62.2" (1580 mm)
Overall Length: 16.6" (422 mm)
Height: 21.5" (546 mm)
Weight: 115 lb (52.2 kg)
ISO Struck Capacity: 3.6 cu ft (0.10 cu m)
ISO Heaped Capacity: 4.7 cu ft (0.13 cu m)
Weight Capacity: 500 lb (226.8 kg)
 

·
Registered
Joined
·
107 Posts
Discussion Starter #5
PALLET FORKS



Move pallets, bulk materials, bagged items and more all around the job site.

KEY FEATURES
Floating-Tine Pallet Forks: Allow operator to pick up pallets on uneven terrain.
Adjustable Tine Width: Allows transport of various cargo types.
Tapered Fork Tines: Make cargo lifting easier.

SPECS
Overall Width: 38" (965 mm)
Overall Length: 42.4" (1077 mm)
Height: 23" (584 mm)
Weight: 113 lb (51.3 kg)
Fork Width: 2" (51 mm)
Number of Teeth Shipped: 2
Weight Capability: 450 lb (204.1 kg)
 

·
Registered
Joined
·
107 Posts
Discussion Starter #6
SNOW BLADE



Clear safe pathways for pedestrians and motorists in a variety of settings, such as private residences, commercial lots and sidewalks.

KEY FEATURES
Hydraulic Angling: Allows an operator to angle plow 30º left or right from inside the vehicle with an intuitive remote switch.
Adjustable-Depth Skid Shoes: Prevent scraping by holding the current height of the blade.
Rolled Trip Blade: Allows materials to flow easily, creating less drag.
Boxed-In, Reinforced Blade: A boxed-in back plate adds reinforcement for a stronger, more durable blade and cutting edge.
Tension Spring Trip Blade: Reduces the impact damage to blade, vehicle and operator.
Adjustable Springs: Adjust tripping mechanism with the eyebolts for preferred tension.
Optional Markers (as shown): Give operator clear visibility of blade width.

SPECS
Width: 69" (1753 mm)
Working Width (Fully Angled): 59.8" (1519 mm)
Length: 25.6" (650 mm)
Height: 21.4" (544 mm)
Blade Height: 20" (508 mm)
Operating Weight: 275 lb (125 kg)
Angle: ±30°
Steel Cutting Edge: 0.38" x 4" (10 mm x 102 mm)
Opt. Rubber Cutting Edge: 1" x 5" (25 mm x 127 mm)
Opt. Polyether Cutting Edge: 1" x 6" (25 mm x 52 mm)
Trip Springs: 2
Blade Sweep: 55°
 

·
Registered
Joined
·
107 Posts
Discussion Starter #7
I know round my parts I'll be needing the Finishing Mover, Snow Blower/Snow Blade, and Materials bucket. The Brutus will give the opportunity to sell some of my other machines just because the Brutus is so versatile...

What Accessories are you guys interested for your Brutus?
 

·
Registered
Joined
·
30 Posts
Wow I didn't think there would be these kinds of attachments out for the brutus. Just gives me more reasons to get one now. Life would be so much easier with these attachments. Plowing would be fun actually.
 

·
Registered
Joined
·
204 Posts
I'm most interested in the snow equipment. I wonder if the snow blade will be effective enough to push heavy snow out of the way. I usually use my truck but its not always convenient due to the size.
 

·
Registered
Joined
·
107 Posts
Discussion Starter #11
I'm most interested in the snow equipment. I wonder if the snow blade will be effective enough to push heavy snow out of the way. I usually use my truck but its not always convenient due to the size.
Well the Brutus does come with an available snow blower attachment so you could just use the Brutus snow blower and then any little cleanup can be handled by the pickup?

But keep in mind that the Brutus snow blade will function on the Brutus HD and HDPTO models but the snow blower will only function on a Brutus HDPTO.

Brutus HD is hydraulics only, Brutus HDPTO is hydraulics and power take-off, you can also get a base Brutus if you dont need any of these accessories.
 

·
Registered
Joined
·
41 Posts
Great info, wasn't aware the Brutus can be setup for it, should have known this was possible. Now it has me thinking if Polaris is open to fleet sales for companies that will use the Brutus for property maintenance.
 

·
Registered
Joined
·
20 Posts
Yeah the snow blower attachment would be the best one for since we have a long and wide driveway that would make things so much easier.
 

·
Registered
Joined
·
204 Posts
Great info, wasn't aware the Brutus can be setup for it, should have known this was possible. Now it has me thinking if Polaris is open to fleet sales for companies that will use the Brutus for property maintenance.
a truck is more suitable. The brutus would be good for light duty or small areas. A large parking lot would take forever.
 

·
Registered
Joined
·
107 Posts
Discussion Starter #15
Great info, wasn't aware the Brutus can be setup for it, should have known this was possible. Now it has me thinking if Polaris is open to fleet sales for companies that will use the Brutus for property maintenance.
Thats my thought exactly, but more along the lines of golf courses. Think about the cost reduction a fleet of Brutus would give them over the typical hodge podge of maintenance vehicles. I used to work at a golf course growing up and we had multiple grass cutters, fertilizers, rollers and general all purpose SxS.

With a fleet of Brutus' golf courses can eliminate the need to buy separate fleets of lawn mowers and clean up equipment. I assume if demand spikes from the industry Polaris looks at expanding the HDPTO attachments...
 

·
Registered
Joined
·
30 Posts
I just showed my wife the attachments for the brutus and shes is game for us to get it. Now with all the support its just a matter of time before we get one. Can't wait.
 

·
Registered
Joined
·
107 Posts
Discussion Starter #18
have you guys been able to find out what the attachments will be priced like?
Yes sir, and they wont be cheap. You have to figure if you want the Brutus HDPTO model to be capable of using the attachments your looking at $24k MSRP plus attachments...

Materials Bucket $599
Snow Blade $1949
Pallet Forks $999
Snow Blower $4299
Lawn Mower $3499
Angle Broom $4499
 

·
Registered
Joined
·
41 Posts
Yes sir, and they wont be cheap. You have to figure if you want the Brutus HDPTO model to be capable of using the attachments your looking at $24k MSRP plus attachments...

Materials Bucket $599
Snow Blade $1949
Pallet Forks $999
Snow Blower $4299
Lawn Mower $3499
Angle Broom $4499
Thanks! I don't think this was listed on the Polaris website unless I missed it.

Do you know what the warranty term is like on these attachments?
 

·
Registered
Joined
·
30 Posts
The angle broom is the most expensive I think I can go without it. But the snow blower attachment is a must. There better be a warranty for the parts though. It can be costly to have someone fix it.

which attachments are you guys looking in to getting?
 
1 - 20 of 27 Posts
Top